Untitled

Microtruder Technology

1.Feed Sections : Select the feed section that is right for your feed stock, output and pressure stability:
-Standard (smooth bore)
-Classic (smooth bore)
-Aggressive (smooth bore)
-Grooved Bore Series'
-Roller Feed (for soft strips)
-Melt Feed (for reactors)

2.Screw: Working LID 24:1 in standard and custom designs including mixing sections.

3. Barrel: Nitrided stainless steel or bimetallic lined for corrosion or wear resistance.

4. Heated Clamping Plate: Heaters provide thermal control to prevent freeze-off. Screws secure transfer tube for leak free operation.

* Die: Available dies include strand, film, monofilament, coextrusion, tubing, and sheet.

5. Transfer Tube: Heated by the barrel and the clamping plate to eliminate cold spots, the transfer tube holds the breaker plate.

6. Breaker Plate: Holds the screen pack in streamlined stainless steel construction.

7. Gear Reducer: Double enveloping, low backlash gearing with high performance integral thrust bearings.

8. DC Motor : Includes tach feedback for uniform speed control.

9. Hopper: Stainless steel (s.s.), optionally sealed for nitrogen purge or powdered feed stocks.

10. Feed Section Cooling: Hardened s.s. features (3) LID's of directed cooling for positive temperature control of solids conveying.

11. Stainless Steel Cover: Cooling fans are optional for precision temperature control.

12. Barrel Heaters: Standard mica or high temperature mineral filled.

13. Type "J" Thermocouple Ports

14. Pressure Port & Rupture Disc: Pressure measurement before the breaker plate is a recommended option.

15. Surge Suppressor : Automatic surge reduction in every screw.

16. Barrel Flange: Change the extruder's output direction by rotating the flange on the gearbox. Flange cooling keeps the gearbox oil cool. Assembly is shown for standard right to left operation.

17. Adjust Height and Level: Change the center line of the output as needed on swivel brass pads. Optional mounting systems available .
E-mail: lab@labkorea.com
에스엘 텍트라(주)
인천 광역시 남동구 구월3동 1382-4 번지
전화 : 032-431-2371 팩스 : 032-431-2372
ⓒCopyright 1999 www.labkorea.co.kr ® All right reserved

Microtruder Technology
1.Feed Sections : Select the feed section that is right for your feed stock, output and pressure stability: -Standard (smooth bore) -Classic (smooth bore) -Aggressive (smooth bore) -Grooved Bore Series' -Roller Feed (for soft strips) -Melt Feed (for reactors) 2.Screw: Working LID 24:1 in standard and custom designs including mixing sections. 3. Barrel: Nitrided stainless steel or bimetallic lined for corrosion or wear resistance. 4. Heated Clamping Plate: Heaters provide thermal control to prevent freeze-off. Screws secure transfer tube for leak free operation. * Die: Available dies include strand, film, monofilament, coextrusion, tubing, and sheet. 5. Transfer Tube: Heated by the barrel and the clamping plate to eliminate cold spots, the transfer tube holds the breaker plate. 6. Breaker Plate: Holds the screen pack in streamlined stainless steel construction. 7. Gear Reducer: Double enveloping, low backlash gearing with high performance integral thrust bearings. 8. DC Motor : Includes tach feedback for uniform speed control.		9. Hopper: Stainless steel (s.s.), optionally sealed for nitrogen purge or powdered feed stocks. 10. Feed Section Cooling: Hardened s.s. features (3) LID's of directed cooling for positive temperature control of solids conveying. 11. Stainless Steel Cover: Cooling fans are optional for precision temperature control. 12. Barrel Heaters: Standard mica or high temperature mineral filled. 13. Type "J" Thermocouple Ports 14. Pressure Port & Rupture Disc: Pressure measurement before the breaker plate is a recommended option. 15. Surge Suppressor : Automatic surge reduction in every screw. 16. Barrel Flange: Change the extruder's output direction by rotating the flange on the gearbox. Flange cooling keeps the gearbox oil cool. Assembly is shown for standard right to left operation. 17. Adjust Height and Level: Change the center line of the output as needed on swivel brass pads. Optional mounting systems available .