Falex High Performance Multi-Specimen Test Machine
ASTM Specifications : D-2266, D-3702, D-4172
See also for more information :
Model 6 : Multi-Specimen Test Machine
High Performance Multi-Specimen Test Machine With Digital Instrumentation System
Features and specifications
Speed & Velocity:
Ten turn variable speed control dial. Seven way speed range from 10 to 300 RPM, 10 to 450 RPM, 25 to 900 RPM, 50 to
1800 RPM, 100 to 3600 RPM, 150 to 7200 RPM and 300 to 10,800 RPM, ±0.5% accuracy*. With optional adapter, speeds
as low as 0.01 are possible.
Load:
Applied through a pneumatic system. Dual range loading from 100 to 2000 lbs. And 50 to 1000 lbs. ±2% accuracy*.
With low load option from 5 to 60 lbs., ±2% accuracy*.
Temperature Control:
Controlled system with digital proportional indicator/controller, high temperature limit cut-off, heater cup, special
ceramic high temperature insulators and automatic temperature start-up. Temperature control from ambient to
870±3°C. (1600±5°F), optionally to 1093°C (2000°F). Specially designed water cooled test shaft. Optional
refrigeration system cools reservoir fluid from ambient to -30°C (-22°F) for circulation through optional cooling
chamber. When using Standard Multi-specimen adapters, temperature limit is 232 °C (450°F).
Environments:
Wet or dry. Enclosed chamber for containing humidity or circulating special atmospheres and fluids.
Motion:
Unidirectional or optional oscillatory, both high and low speed. Low speed from 50 to 600 cycles per minute, 0° -
90°. High Speed:
Degrees of Oscillation
Cycles per Minute Ranges
0° - 20°
50 - 1500
21° - 30°
50 - 1200
31° - 40°
50 - 1100
41° - 50°
50 - 900
51° - 70°
50 - 600
71° - 90°
50 - 500
Optional secondary controllable drive system, perpendicular to main test shaft for controlling speed of rollers when
testing with infinitely variable roll/slide adapter for evaluating gear system materials.
*All accuracies are percent of full scale. Other accuracies available on special quote.
Torque:
Measured by load cell with digital panel meter and digital printer. Automatic high limit torque cut-off. Field
calibration system. Optional low range for greater accuracy in measuring torque from 0 to 25 lbs-in ±2% full scale
accuracy.
Available Speed Ranges
(Customer to choose from available ranges)
Spindle Speed Maximum Available
Ratio
RPM
Torque (lbs-in)
1:6
1:4
1:2
1:1
2:1
4:1
6:1
10-300
10-450
25-900
50-1800
100-2600
150-7200
300-10800
450
420
210
105
52.5
26.26
13.1
Wear:
Continuous electronic wear-indicating system incorporating an LVDT and digital indicator. (Reads to 0.0001 inch).
Test Time:
Digital timer/controller for automatic start-up or shut-off.
Cycle Counter:
Panel mounted cycle counter with automatic cut-off. (999,999 cycles).
Motor:
3 HP, variable speed DC motor.
Standard High Performance Multi-Specimen Configurations:
Area Contact: Thrust Washer
Line Contact: Vane-on-Disk
Point Contact: Pin-on-Disk
Optional High Performance Multi-Specimen Configurations:
Sheet Metal Forming Test Adapter
Rolling Four Ball
Small Thrust Washer
Single Ball-on-Disk
Standard Multi specimen adapters can be used up to a temperature of 230°C.
주문하세요
