Falex Tapping Torque/ Metal Forming Simulation Test Machine
ASTM Specifications : D-5619
Features and specifications
Available operating options :
Cutting tapping and forming tapping (nut blank and tap)
Linear drawing (sheet and drawing specimen)
Rotational drawing (sheet and drawing specimen, adapter)
Forming (crossed sheet and ball-forming specimen)
Tube drawing (lower specimen and drawing specimen)
Drilling (nut blank, drill and drill adapter, separate lead screw)
Speed:
Dual speed range 10 to 450 and 20 to 900 rpm.
Velocity:
Dual range 1.03 to 46.4 fpm and 2.06 to 92.8 fpm.
Driving Torque:
Dual range: 0 to 32.5 Newton-Meters (288 in-lb.) and
0 to 65.0 Newton-Meters (576 in-lb.)
Tapping Head:
Procunier ~ Tapping Head with precision 1.5 mm lead screw designed to eliminate axial thrust, 6 cm (2.375 in) total
lead screw travel.
Concentricity:
Tapping head to specimen table is factory aligned. Specimen nut is centred on I.D. by pilot plug prior to locking in
place. Critical alignment is easily assured with the use of the high tolerance test samples and centering tools.
Torque Monitoring:
Load cell monitors torque produced on test nut blank during testing. The data acquisition system allows user to select
initial and final points on the torque trace for determination of average torque values produced during the test. The
resultant average torque values are plotted and compared to a reference for determining efficiency of the fluid. With
this data the user can rank fluids. Tool life and machinability of materials.
Software:
Falex Data Acquisition Program acquires the test data and provides digital and graphic presentations. Tests can be
directly compared by plotting percent efficiency or torque versus operation. Software performs line fitting statistical
calculation of data to distinguish tool wear.
Specimens:
Nut: Controlled metallurgy and surface finish, 16-25 in. I.D. held ±.00015 in. Square to base .0005 in. Available from a
wide range of materials in sizes for cut or formed thread.
Tap: 10 x 1.5 mm cutting or forming tap. Specifically made to high precision specimen tolerances and metallurgy.
F-1508 TAPPING TORQUE TEST MACHINE WITH COMPUTERISED DATA ACQUISITION SYSTEM
Includes the Following:
Two HP, DC Motor
Procunier~ 3 ALH Tapping Head with 1.5 mm Lead Screw
Variable Speed Sensor & Control
DC Motor Controller
Air Pressure Gage & Regulator
Torque Measuring System Field Torque Calibration Fixture
Safety Guard
Chip Screen
Cutting Centering Plug
Forming Centering Plug
Forming & Cutting Nut Blank Sizing Gates
Data Acquisition System Includes:
IMBR Computer System
Color Monitor
Keyboard & Mouse
Internal Modem Internal Backup Tape Drive
Hard Disk Drive
3.5 inch Floppy Disk Drive
Color Printer
Software Included:
Falex Data Acquisition Program
DOS, Windows™
Screen Capture Software Falex Data Display, Trending & Report Printing
Program with Spreadsheet Compatible File Generation
주문하세요
