Heat Exchanger

High heat removal capacity and accurate temperature control
Chillers provide clean, consistent temperature liquid
     for cooling open tank system.

Ideal for temperature regulation of lasers, electron microscopes, vacuum diffusion pumps, GC/MS, NMR, ICP, FTIR, distillation condensers, other lab instruments.

Converting to closed loop system saves water and sewage charges.

HBP cooling system can obtaine about 3 times than that of conventional refrigerating sytem.

Equipped with low liquid level with alarm and liquid supplement indicator.

Easy to clean condenser.

Model

HX-03

HX-06

Type

Heat Exchanger

Heat Exchanger

Capacity

15 L

30 L

Temp.

Range

3`C ~ 30`C

3`C ~ 30`C

Accuracy

± 2`C at 25`C

Controller

Mechanical type

Size

Overall (WxDxH)

360x465x575 (mm)

440x580x896 (mm)

Safety

Over Temp.

Hydraulic over temperature limit

Low Level

Magnetic float & level switch

Magnetic float & level switch

Elecrical

Over current breaker switch

Structure

-

-

Material

Bath

External

Bath up Desk

Heater

-

-

Insulation

Inflammable polystyrene form (10mm)

Probe

Pump

SUS housing, Plastic pump (ABS)

Refrigerator

1/3 Hp

3/4 Hp

Cooling capacity

800 kcal/hr at 15'C

1500 kcal/hr at 15'C

Electric Requirements

220 VAc, 50/60 Hz

220 VAc, 50/60 Hz

Power Consumption

6.0 A, max

10.0 A, max

Weight(Net)

46.0 kg

90.0 kg

Cold Trap Bath

Digital temperature display
Application for cold trap required low temperature
Temperature range ; max. -40`C or -70`C (depend on the model)

Digital display bath temperature. Glass or metal traps are available, large capacity trap by itself. It has a drain port for defrost ice and solid state materials. Short time freezing for variable samples preparation. Over current breaker protect over current from the unit.

Accessory & Option for ColdTtrap

CE-500(U-type Glass Trap for CTB-10/20)

Model

CTB-10

CTB-20

Capacity

4.8 L

4.8 L

Temp.

Range

Down to -40`C

Down to -70`C

Indication

Indicator

Indicator

Size

Bath (FxH)

φ210×204 (mm)

φ210×204 (mm)

Overall (WxDxH)

360x465x555 (mm)

400x580x626 (mm)

Safety

Electrical

Over current breaker switch

Material

Bath

External

Bath up Desk

Insulation

Polyurethan foam (30mm)

Refrigerator

One step, 1/2HP

Two step, 1/2HP 2ea

Electric Requirements

220 VAc, 50/60 Hz

220 VAc, 50/60 Hz

Power Consumption

5.0 A, max

10.0 A, max

Weight(Net)

46.0 kg

75.0 kg

Electric Aspirator

Saving water, Saving cost

Application for filtration, distillation, rotary vaccum evaporator
Options for better performance - plastic aspirator, vacuum regulator, cooling coil
Durable and convenient design

Saving water, Saving cost -- You can save water and cost because it is not necessary to flow tap water in the lab. continuously.

With hydraulic pressure obtained by use of motor pump and check valve protecting against upstream, you can use for applications of filtration, distillation, rotary vacuum evaporator.

Options for better performance - plastic aspirator, vacuum regulator, cooling coil There are options for better performance as a plastic aspirator made of corrosion-resistant material, a vacuum regulator for precise vacuum gauge and a cooling coil for preventing from reducing vacuum effect by increasing temperature of water in the bath.

Durable and convenient design Made of polypropylene bath is durable and drain cock is useful for drain water in the bath.

Cooling coil

Filter Pack

Vacuum regulator

ET-01 / ET-02

Model

VE-11

Pump Capacity

18 L / min x 2 ea

Bath Capacity

9.5 L

Motor Power

150 W

Material

Bath

Polypropylene

Aspirator

Metal 2ea

Size

Bath (WxDxH)

298 x 210 x 227 (mm)

Overall (WxDxH)

330 x 265 x 390 (mm)

Absorption nozzle

9.5 Ø x 2ea

Overflow nozzle

17 Ø

Safety

Over current glass fuse, check valve

Electric Requirements

AC 220 V, 50/60 Hz or AC 110 V, 60 Hz

Power Consumption

0.7 A / AC 220 V or 1.4 A / AC 110 V

Permissible environmental condition

Temperature 5℃ to 40℃, relative humidity 50% to 80%, altitude up to 2,000m

Weight(Net)

5.7 kg