5MBA Advanced Melt Flow System MFI is the mass flow rate of a molten polymer at controlled conditions of temperature and pressure, extruded through a very precise orifice. Although not a fundamental property of the material, the MFI is one of the most widely used parameters for the quality control of polymers. RR2800 : 5MBA Advanced Melt Flow System Basic manual test procedure. MFI is obtained by measuring the mass extruded over a given time interval. Conforms to the following International Test Standards :- ASTM D1238, BS 2782, ISO E1133, UNI 5640-74, UNE 53098, AFNOR TSI-016, ASTM D3364, NPT 51-016, DIN 53735. Supplied as standard are the following features :-
All 5 series advanced melt flow systems are completely modular in design and can be upgraded at any time. A wide range of test weights, also modular is design, are available upon request together with an extensive list of tooling and cleaning ancillaries. Cylinders, test dies and pistons can be manufactured in Hastelloy material for corrosive materials. Return to base calibration service also available upon request. Electrical Characteristics The equipment can be supplied with either of the following electrical configurations :- 220-240 volts 1 ph @ 50 Hz 100-120 volts 1 ph @ 60 Hz |
|
5SA Advanced Melt Flow System MFI is the mass flow rate of a molten polymer at controlled conditions of temperature and pressure, extruded through a very precise orifice. Although not a fundamental property of the material, the MFI is one of the most widely used parameters for the quality control of polymers. RR2900 : 5SA Advanced Melt Flow System Semi-automatic test procedure. MFI is obtained by automatically measuring the volumetric flow rate and using the density at test temperature to convert to MFI. This procedure conforms to Method B of the ASTM Standard. Conforms to the following International Test Standards :- ASTM D1238, BS 2782, ISO E1133, UNI 5640-74, UNE 53098, AFNOR TSI-016, ASTM D3364, NPT 51-016, DIN 53735. Supplied as standard are the following features :-
All 5 series advanced melt flow systems are completely modular in design and can be upgraded at any time. A wide range of test weights, also modular is design, are available upon request together with an extensive list of tooling and cleaning ancillaries. Cylinders, test dies and pistons can be manufactured in Hastelloy material for corrosive materials. Return to base calibration service also available upon request. Electrical Characteristics The equipment can be supplied with either of the following electrical configurations :- 220-240 volts 1 ph @ 50 Hz 100-120 volts 1 ph @ 60 Hz |
|
5MPCA Advanced Melt Flow System MFI is the mass flow rate of a molten polymer at controlled conditions of temperature and pressure, extruded through a very precise orifice. Although not a fundamental property of the material, the MFI is one of the most widely used parameters for the quality control of polymers. RR3000 : 5MPCA Advanced Melt Flow System Fully computerised automatic test procedure. Direct program choice for single MFI test, multi-slice MFI test or density determination at test temperature. Results provided cover MFI, shear stress, shear rate and viscosity. Batch statistics provided giving average MFI and standard deviation over 20 sets of results. Conforms to the following International Test Standards :- ASTM D1238, BS 2782, ISO E1133, UNI 5640-74, UNE 53098, AFNOR TSI-016, ASTM D3364, NPT 51-016, DIN 53735. Supplied as standard are the following features :-
All 5 series advanced melt flow systems are completely modular in design and can be upgraded at any time. A wide range of test weights, also modular is design, are available upon request together with an extensive list of tooling and cleaning ancillaries. Cylinders, test dies and pistons can be manufactured in Hastelloy material for corrosive materials. Return to base calibration service also available upon request. Electrical Characteristics The equipment can be supplied with either of the following electrical configurations :- 220-240 volts 1 ph @ 50 Hz 100-120 volts 1 ph @ 60 Hz |
|
Model 2 Test Sample Injection Moulding Apparatus A simple to use, low cost moulding machine, compact in design for bench mounting, with a very small foot print. A unique cylinder / die extraction system eliminates purging when changing from one color or material to another. Incorporates extremely low cost tooling to produce a very wide variety of polymer test samples. The standard cylinder polymer charge is 57 cm3, but cylinders up to 70 cm3 can be supplied upon request. RR3400 : Model 2 Test Sample Injection Moulding Apparatus Supplied as standard are the following features :-
Ancillary Items 3400-08-00 : Basic
Tool Block with Special Cam Locking Mechanism Typical Tool Inserts For Basic Tool Block Tool Insert (Small
Tensile Dumbbell) Tool inserts are available with mirror finish upon request. When ordering tool inserts please supply a diagram or the number of the International Test Standard, i.e. ASTM, ISO, BS, DIN, etc. Electrical Characteristics The equipment can be supplied with either of the following electrical configurations :- 220-240 volts 1 ph @ 50 Hz 100-120 volts 1 ph @ 60 Hz |
|
Hand Operated Test Sample Precision Cutting Press The precision test sample cutting presses have been designed to cut plastic, rubber, paper, fabric and laminates, etc. Adapters can be supplied to suit any cutter shank. The presses can be supplied with cutting tools to suit almost any shape. RR2600 : Hand Operated Precision Test Sample Cutting Press Supplied as standard are the following features :-
Any shape of cutting tool can be provided. When ordering, please submit dimensions and standard numbers where applicable. i.e. ASTM, ISO, BS, DIN, etc. |
|
Pneumatically Operated Test Sample Precision Cutting Press The precision test sample cutting presses have been designed to cut plastic, rubber, paper, fabric and laminates, etc. Adapters can be supplied to suit any cutter shank. The presses can be supplied with cutting tools to suit almost any shape. RR2700 : Pneumatically Operated Precision Test Sample Cutting Press Supplied as standard are the following features :-
Any shape of cutting tool can be provided. When ordering, please submit dimensions and standard numbers where applicable. i.e. ASTM, ISO, BS, DIN, etc. Electrical Characteristics The equipment can be supplied with either of the following electrical configurations :- 220-240 volts 1 ph @ 50 Hz 100-120 volts 1 ph @ 60 Hz |
|
Model 2 Motorised Auto Feed Precision Notch System Designed to machine with a single tooth or multi-tooth cutter, very precise stress concentration notches in test specimens to ensure that breakage of the specimen takes place at the same section each time a test is carried out. mainly intended for use with plastic polymer materials, the variable speed range of the cutter and traverse feed enables the optimum cutting conditions to be established for each different material. The apparatus has a micro height adjustment and notch depth dial gauge to ensure that the notch depth is accurately controlled. RR1900 : Model 2 Motorised Auto Feed Precision Notch System Supplied as standard are the following features :-
Spare Parts And Ancillaries Single Tooth Cutter
Wheel (to any specification) Electrical Characteristics The equipment can be supplied with either of the following electrical configurations :- 220-240 volts 1 ph @ 50 Hz 100-120 volts 1 ph @ 60 Hz |
|
Advanced Universal Pendulum Impact System The apparatus has been designed in accordance with all International Test Standards for Izod, Charpy, Tension and now Puncture impact testing. The design utilises Ray-Ran's well proven advanced dedicated microprocessor technology for simplicity, ease of operation, high accuracy and repeatability of results. RR2500 : Advanced Universal Pendulum Impact System Supplied as standard are the following features :-
Specimen Holding Fixtures 2500-04-00 : Izod Vice Pendulum Impact Hammers Hammers can be supplied to any International Test Standard for Izod, Charpy, Tension and now Puncture impact testing. Please contact us for further information. Spare Parts And Ancillaries 2500-15-00 : Free Standing
Low Temperature Chamber to -45 °C Electrical Characteristics The equipment can be supplied with either of the following electrical configurations :- 220-240 volts 1 ph @ 50 Hz 100-120 volts 1 ph @ 60 Hz |
|
New Advanced Static And Dynamic Friction System Designed in accordance with all International Test Standards, the advanced dedicated microprocessor controlled system gives a high accuracy of results for both static and dynamic friction. RR3600 : Advanced Static And Dynamic Friction System Supplied as standard are the following features :-
Ancillary Items Peel attachments available to any International Test Standard are available upon request. Heated Platen Freezer Bed to 0 °C |
|
|
 |
주문하세요
