R-211 Series  Glass Reactor System

 

General

 

         - Capacity of this R-211 Series Glass Reactor is from 300ml up to 10 Liters, and designed

            for using in 50~220 psig at 250`C.

         - This R-211 Series Glass Reactor is designed also to have the choice of purchasing only Glass Vessel(R-201)

            for much more economic performances of the system.

         - Glass Vessel can be used in maximum pressure of 220 psig at 250`C

         - Bench and Floor Stand are designed for the most convenient way for working.

         - This R-211 Series Glass Reactor is designed to use the Metal Seal Ring, when higher than 250`C,

           at low torque closure, too, and when lower than 250`C, you can use "O"Ring as well.

         - This R-211 Series Stirred Reactor is designed to be compatible in its capacity;

            you can use 500 ml and or 2000ml Vessel for 1000ml Reactor.

 

 Features

 

         - Capacity : 300ml - 10 Liter

         - Design Pressure : 220psig

         - Design Temperature : -30`C ¡­ 250`C

         - Materials : Glass

         - Power  : 110VAC and 220 VAC, 220 VAC/3-Phase

         - DC Motor : 60W, 90W, 1/8hp, 1/4hp, 1/2hp, 1hp.

         - Magnetic Drive : 16 in-lbs, 32 in-lbs, 64 in-lbs, 120 in-lbs.

         - RPM : 0 ~ 1800 rpm

         - Heater : 0.5KW ~ 5KW

         - Stand : Bench and Floor Stand

         - Gas Inlet Nozzle and Valve

         - Gas Vent Nozzle and Valve

         - Sample Nozzle and Valve

         - Thermowell and "K" Type Thermocouple

         - Cooling Coil Inlet and Outlet Nozzle

         - Pressure Gauge and Pressure Transmitter

         - Relief Valve

 

  

Magnetic Drive

 

         - The pressure and temperature of our M-Series Magnetic Drive is designed to be used for 5,000psig at up to 500¡É

         - You have many choices to use of our Magnetic Drive as the torque varies 8, 16, 32, 64

            and 120 in-lbs according to the different capacity of Reactor.

         - The rpm of our Magnetic Drive is designed for using from 100 up to 3,500 rpm.

         - The Agitator for our Magnetic Drive should be selected based on the viscosity of Reactant.

         - The Material used for building our Magnetic Drive is Samarium Cobalt.

 

Agitators

 

         - Standard Impeller of R-211 Series Reactor is Pitched Blade Turbine which is able to use up to 2,500 rpm.

         - Anchor Impeller is able to use when the viscosity comes up more than 10,000 to 50,000cp.

         - With Helical Impeller, as in the case of High Polymerization, you can use at high viscosity such as more than 50,000 cp.

         - Propeller Impeller is used for the same application as of Pitched Blade Turbine.

 

Pitched Blade Turbine	Anchor Impeller	Helical Impeller

 

Applications

 

         - Applications of our R-211 Series Reactor are for;

             - Polymerization                    

             - Organic Synthesis

             - Hydrogenation

             - Dehydrogenation

             - Catalytic Reaction

             - Oxidation

             - Isomerization

             - Amination

             

DC Motor

 

         - 60W Motor to be used for 300ml R-211 Series Reactor and 90W Motor to be used for 500ml Reactor.

         - 1/8hp and 1/4hp Motor to be used for 1 Liter ~ 2 Liter Reactor.

         - 1/2hp and 1hp Motor to be used for 4 Liter ~ 10 Liter Reactor.

 

Stand

         - Either Bench Stand or Floor Stand will be used for R-211 Series Reactor.

 

Heater Rating

 

         - 0.5KW ~ 0.8KW Band Heater to be used for 300ml Reactor

         - 0.8KW ~ 1KW Band Heater to be used for 500ml ~ 1Liter Reactor.

         - 1.2KW ~ 1.5KW Band Heater to be used for 2Liter ~ 4Liter Reactor.

         - 4KW ~ 5KW Band Heater to be used for 8LIter ~ 10Liter Reactor.

         - Options : Reactor Vessel Jacket Type design also available for option.

                            Oil Circulator is also available for option.

 

Cover Openings

 

         - Two for Cooling Coil : 1/8" NPT and 1/4"NPT(F)

         - Gas Inlet Nozzle and Valve : 1/8" ~ 1/4" NPT(F)

         - Gas Vent Nozzle and Valve : 1/8" ~ 1/4" NPT(F)

         - Sample Valve and Tube : 1/8" ~ 1/4"NPT(F)

         - Pressure Gauge and Relief Valve : 1/8" ~ 1/4" NPT

         - Magnetic Drive : M-24-1.5P

         - Solid Charging Nozzle : 1/4"NPT

 

Flush Bottom Valve

 

         - Design Pressure : 1,000psig ~ 5,000psig

         - Design Temperature : 100`C ~ 400`C

         - Materials : 316SS, Hastelloy.C-276, Titanium

         - Size : 1/4"NPT, 1/2"NPT, 1"NPT, 2"NPT

 

R-211 Series Glass Reactor Specifications

 

Series	Volume	I.D.	I.L.	Conn. Size	Stand	Std. Heateer Voltage	Heater, KW
211-3	300ml	51mm	150mm	1/8" NPT	Bench	220/1/60	0.5
211-5	500ml	55mm	230mm	1/8" NPT	Bench	220/1/60	0.8
211-1	1000ml	86mm	180mm	1/4" NPT	Bench	220/1/60	1.0
211-2	2000ml	94mm	280mm	1/4" NPT	Bench	220/1/60	1.5
211-4	4000ml	127mm	330mm	3/8" NPT	Floor	220/1/60	2.0
211-8	8000ml	155mm	460mm	3/8" NPT	Floor	220/1/60	3.5
211-10	10000ml	203mm	584mm	3/8" NPT	Floor	220/1/60	5.0

 

Series	Max. Pressure	Mag. Drive	Motor	Jacket Design	Pressure Utility Connections
211-3	220 psig	16 in-lbs	1/12hp	30psig	Gas Inlet & Valve, Vent Valve Sample Tube & Valve, Process(MD) Cooling Inlet & Outlet Thermowell, Drain Spare Nozzle Mag. Drive  Water Inlet & Outlet
211-5	220 psig	16 in-lbs	1/8hp	30psig
211-1	220 psig	16 in-lbs	1/4hp	30psig
211-2	150 psig	16 in-lbs	1/4hp	30psig
211-4	150 psig	32 in-lbs	1/2hp	30psig
211-8	100 psig	60 in-lbs	1/2hp	30psig
211-10	100 psig	60 in-lbs	3/4hp	30psig

 

 

R-211 Series Glass Reactor Control System

 

         1. Manual Control

             This R-211 Series Reactor is designed for T-211, S-211 and P-211 to be used conveniently in the Control Box.

             Also is designed for the Cable between Reactor Control box to be separated easily by using quick-connect couplings.

 

           1) Temperature Control (T-211)

               - Size : 96mm ¡¿ 96mm

               - Calibration : Accuracy ¡¾0.15% of reading

               - Process : TC Inlet Type "K"  (Chromel - Alumel) Standard

               - Process : TC Range : 0 ~ 1200¡É for Type "K" TC

               - Indication : 16 Segment Green LFD, Digital-4 digits

               - Cycle Time : 3 to 80 Seconds

               - TC Break : Upscale Shutdown

               - Output : 4~20mA & SCR

               - Power : 220VAC, 60Hz, 1Phase

 

           2) Speed Control (S-211)

               - Power : 220VAC, 60Hz, 1Phase

               - Indicator Accuracy : ¡¾1 Count

               - Indicator : 4 digits

               - Resolution : 1 rpm

               - Motor Contrl Speed Range : 50 : 1

               - Max. Motor Size: 3/4 hp            

               - Motor Voltage : 0~180VDC  (220VAC Input)

               - Output : 0~12VDC

               - Size : 48mm¡¿96mm

 

           3) Pressure Control (P-211)

               - Transducer Excitation : 10VDC

               - Type of Input Accepted : 1~5mV/L

               - Transducer Current Drive : 120mA

               - Transducer Impedance : 120 §Ù

               - Analog Output : 5V, 10V, ¡¾10V, 4~20mA

               - Temperature Drift : 0.02% F-S/`C

               - Display Size : 16mm Large

               - Resolution Maximum : ¡¾19999

               - Weight : 500g

               - Size : 48mm ¡¿ 96mm

               - Power : 220VAC, 60Hz, 1Phase

 

         2. Computer Control

        

Glass Vessel Ordering Information

  

Order No.	Capacity	Pressrue	Dimensions(mm)
			A	B	C	D	E
211-G3	300ml	220psig	111	220	71	51	150
211-G5	500ml	220psig	115	300	75	55	230
211-G1	1000ml	220psig	146	250	108	86	180
211-G2	2000ml	150psig	154	350	118	94	280
211-G4	4000ml	100psig	187	400	155	127	330
211-G8	8000ml	50psig	215	530	185	155	460
211-G10	10000ml	50psig	263	654	233	203	584

 

 

Accessories

 

You can expand the versatility of any 211 series reactor further, through the additions of options and accessories :

            - Catalyst Baskets

            - Baffles

            - Glass Liners & Teflon Liners

            - R-201 Pressure Vessel

            - Flush Valve

            - Torque Meters

            - Flexible Hose

            - Reflux Condensers

            - Sight and Light Windows

            - Feed Tanks

            - Solid Charging System

            - Heat Transfer Package

 

Multi Pilot Plant System(P&ID)

 

Ordering Information

 

211	A	B	C	D	E	F	G	H	I
	Capacity	Pressure	Temp.	Material	Agitator	Power	Drive	Magnetic Drive	Controller
Series 211	1: 300ml 2: 500ml 3: 1 L 4: 2 L 5: 4 L 6: 8 L 7: 10 L 8: Other	1 : 50psig 2 : 100psig 3 : 150psig 4 : 200psig 5 : 220psig 6 : Other	1 : 100 `C 2 : 150 `C 3 : 200 `C 4 : 250 `C 5 : Other	1 : 304SS 2 : 316SS 3 : Hast.C 4 : Titanium 5 : Glass 6 : Hast.B 7 : Other	1 : Turbine 2 : PBT 3 : Propller 4 : Helical 5 : Anchor 6 : Other	1 : 110/60/1 2 : 220/60/1 3 : 210/60/3 4 : Other	1 : Air M. 2 : AC M. 3 : DC M. 4 : Other	1 : MD 2 : MS 3 : Other	1 : PID/Tach/PG 2 : PID/Tach/PI 3 : R & S/Tach/PIC 4 : PLC(LabVIEW Software) 5 : ConBoy Software 6 : Other

 Send your inquiry

 E-mail: lab@labkorea.com

ESEL TechTra Inc.

 #1382-4, Kuweol-3dong, Namdongku, Incheon, korea

 ¨ÏCopyright 1999 www.labkorea.com ® All right reserved