Large steam sterilizer
   HS-700S, HS-1000S, HS-1000D
Middle steam sterilizer
   
HS-4085S, HS-5020S, HS-5025S/D
   HS-5035S/D, HS-250, HS-350S
Semi-automatic steam sterilizer
   HS-85, HS-196
Vacuumclave steam sterilizer
   HS-2321V, HS-3041V
Autoclave
  - Gravity type steam sterilizer
    HS-1212, HS-1321, HS-9041
  -  Vertical type steam sterilizer
    HS-60
Field hospital steam sterilizer
   HS-1636
EO gas sterilizer
   | HS-4085EO | | HS-700EO |
Ultraviolet rays sterilizer
   H-3000B, H-5000A, H-8000C

 

Middle steam sterilizer

| Feature | | Specification |

 

HS-4085S

HS-5020S

HS-5025S/D

HS5035S/D

| Feature | | Specification |

 

HS-250

HS-350S

The sterilizer is equipped with a practical size of rectangular or cylindrical sterilizing chamber. The sterilizing process is most efficient because the materials are sterilized and dreed by air femobal with the pre-vacuum and post vacuum. In particular, the sterilizer with a double door style prevents recontamination by retrieving processed materials to the clean room.

1. CONTROLS

The Control System with a built- in microprocessor, controls process of the cycle, the function of display of a large 5"LCD showing the operating conditions of the sterilizer, the self-diagnosis which detects abnormality and takes necessaly actions and printing which prints out cycle performance records automatically.

2. CYCLE PROGRAM

- The Basic Cycles are programs generally used for most materials to be sterilized.
- The Test Cycles are a Bowie-Dick and a Vacuum Leak Rate Test for chamber.
- The user cycle program can be used and saved by changing the temperature, pressure, exposue time and dry time from the basic cycle programs at the discretion of operator. 

 3. BOWIE-DICK TEST PROGRAM

This program provides a test for air residual in the chamber after air removal by the vacuum system. If this program detects any residual of air, the wrapped materials shall mot be processed with the vacuum cycle program.

 4. LEAK TEST PROGRAM

The leak test program, designed for test of any leakage out of the chamber, shall be performed prior to vacuum sterilization cycle once everyday. If any leakage is detected throughout the test, the vacuum sterilization cycle would not operate.

 5. AIR FILTER

The bacteria-retentive filter which can filter out 99.97% of 0.3§­ particles filters outside air supplied into the chamber during the vent and drying the vent and drying phase. If prevents sterilized items from recontamination by bacteria in the air.

 6. VACUUM SYSTEM

The vacuum system with the water pump and ejector is an equipment used for exhausting air or vapor out of the chamber. If enhances sterilization and drying effect with a strong vacuum force and minimizes noise and malfunction.

 7. DOOR INTERLOCK

For safety, the chamber door would not open when the power is turned off, the cycle would not operate when the door is open and the door would not open when any pressure exists in the chamber. In a case of the double door style, both of doors would not open simultaneously and one of the doors would open only the other one is locked. 

 8. SELF-DIAGNOSIS

Seif-diagnosis, detecting 12 types of error, generates alarm and automatically takes any necessary actions. 

 9. PRINTER

It prints a cycle performance record which reviews, analyzes and saves sterilization results related to management. This document includes sterilizer number, date and yeat, setting value(sterilization temperature, condition temperature, exposure time, and drying time), performance data of each phase (start and finish time, temperature and pressure), maximum/minimum temperature and pressure, elapse time of each phases, acceptance or unacceptance of the cycle and other data (cycle time, cycle number, error codes, power failure/recovery time).

| Specification |

¡¡

MODEL

HS-4085S

HS-5020S

Cabinet

W800×H 1,600×D 892mm

W900×H 1,600×D 1,122mm

Chamber

Stainless Steel(SUS 316)

Stainless Steel(SUS 316)

Cylindrical Type w/Jacker

Cylindrical Type w/Jacker

85.4§¤cap., ø400×D680(mm)

196§¤cap., ø500×D1000(mm)

Operation
Temperature

100¡É¡­135¡É

100¡É¡­135¡É

Air Removal

Vacuum/Gravity

Vacuum/Gravity

Power Source

Standard (Built-in Steam Generator and External Steam System):

Standard (Built-in Steam Generator and External Steam System):

AC220V, 3ph, 3wire,50/60§Ô, 26A or

AC220V, 3ph, 3wire,50/60§Ô, 32A or

AC380V, 3ph, 4wire,50/60§Ô, 15A

AC380V, 3ph, 4wire,50/60§Ô, 20A

Optional(External Steam System):
AC220V, 50/60§Ô, 5A

Optional(External Steam System):
AC220V, 50/60§Ô, 5A

Controls

8bit Microprocessor

8bit Microprocessor

Steam Source

Steam Generator :Heater 9§Ò,
Water Pump : 300W

Steam Generator :Heater 12§Ò,
Water Pump : 300W

External Steam System :
Saturated Steam of 97% Dryness

External Steam System :
Saturated Steam of 97% Dryness

Pressure : 3.5§¸f/§²¡­5§¸f/§²,
Flow Rate : max.10§¸/hr

Pressure : 3.5§¸f/§²¡­5§¸f/§²,
Flow Rate : max.20§¸/hr

Water Source

Pressure:2§¸f/§²¡­5§¸f/§²,
Flow Rate:50§¤/min

Pressure:2§¸f/§²¡­5§¸f/§²,
Flow Rate:50§¤/min

Vacuum System

Water Pump : 220V / 530W,
Water Ejector

Water Pump : 220V / 530W,
Water Ejector

Loading System

Shelves : W300 × L360(mm),2 set,
W238 × L626(mm), 1 set

Shelves : W450 × L450(mm),2 set,
W275 × L954(mm), 1 set

Rack : 1 set

Rack : 1 set

Net Weight

180kg

270kg

Display

160×128 Dots Graphic Display, LCD (EL back-light)

printer

Dot Matrix, 40 Columns, Single Color Paper roll: W57.5mm×L22m

Operational
Environment
Conditions
(IEC601- 1)

¨ÍAn ambient temperature range of + 10¡É to + 40¡É.
¨ÎA relative humidity range of 30% to 75%.
¨ÏAn atmospheric pressure range of 700 hpa to 1,060 hpa
¨ÐA temperature of the water at the inlet of water-cooled EQUIPMENT not
higher than 25¡É

¡¡

MODEL

HS-5025S

HS-5025D

HS-5035S

HS-5035D

Chbinet

W1,000×H1,740×D1,172mm

W1,000×H1,740×D1,109mm

W1,000×H1,740×D1,172mm

W1,000×H1,740×D1,109mm

Chamber

Stainless Steel(SUS 316)

Stainless Steel(SUS 316)

Stainless Steel(SUS 316)

Stainless Steel(SUS 316)

Rectangular Type
w/Jacket

Rectangular Type
w/Jacket

Rectangular Type
w/Jacket

Rectangular Type
w/Jacket

250§¤cap. 
W500×H500×D1,000mm

250§¤cap. W500×H500×D1,000mm

350§¤cap. W500×H700×D1,000mm

350§¤cap. W500×H700×D1,000mm

Single Door

Double Door

Single Door

Double Door

Operation
Temperature

100¡É¡­135¡É

100¡É¡­135¡É

100¡É¡­135¡É

100¡É¡­135¡É

Air Removal

Vacuum/Gravity

Vacuum/Gravity

Vacuum/Gravity

Vacuum/Gravity

Power Source

Standard (Built-in Steam Generator and External Steam System):

AC 220V, 3ph, 50/60§Ô, 55A or AC 380V, 3ph, 4wire, 50/60§Ô, 32A

Optional(External Steam System):AC220V, 50/60§Ô, 5A

Controls

8 bit Microprocessor

8 bit Microprocessor

8 bit Microprocessor

8 bit Microprocessor

Steam Source

Steam Generator:
Heater 20§Ò

Steam Generator:
Heater 20§Ò

Steam Generator:
Heater 20§Ò

Steam Generator:
Heater 20§Ò

Water Pump : 300W

Water Pump : 300W

Water Pump : 300W

Water Pump : 300W

External Steam System:

External Steam System:

External Steam System:

External Steam System:

Saturated Steam of 97% Dryness

Saturated Steam of 97% Dryness

Saturated Steam of 97% Dryness

Saturated Steam of 97% Dryness

Pressure : 
3.5§¸f/§²¡­5§¸f/§²

Pressure : 
3.5§¸f/§²¡­5§¸f/§²

Pressure : 
3.5§¸f/§²¡­5§¸f/§²

Pressure : 
3.5§¸f/§²¡­5§¸f/§²

Flow Rate: max.30§¸/hr

Flow Rate: max.30§¸/hr

Flow Rate: max.30§¸/hr

Flow Rate: max.30§¸/hr

Water Source

Pressure: 
2§¸f/§²¡­5§¸f/§²

Pressure: 
2§¸f/§²¡­5§¸f/§²

Pressure: 
2§¸f/§²¡­5§¸f/§²

Pressure: 
2§¸f/§²¡­5§¸f/§²

Flow Rate : max.50§¤/min

Flow Rate : max.50§¤/min

Flow Rate : max.50§¤/min

Flow Rate : max.50§¤/min

Vacuum System

Water Pump : 
220V/530W

Water Pump : 
220V/530W

Water Pump : 
220V/530W

Water Pump : 
220V/530W

Water Ejector

Water Ejector

Water Ejector

Water Ejector

Loding System

Shelves : 
W450×L906(mm),3set

Shelves : 
W450×L906(mm),3set

Shelves : 
W450×L906(mm),4set

Shelves : 
W450×L906(mm),4set

Rack : 1set

Rack : 1set

Rack : 1set

Rack : 1set

Net Weight

665kg

755kg

770kg

890kg

Display

160×128 Dots Graphic Display, LCD (EL back-light)

Printer

Dot Matrix, 40 Columns, Single Color Paper roll: W57.5mm×L22m

Operational
Enviroment
Conditions
(IEC601-1)

¨ÍAn ambient temperature range of + 10¡É to + 40¡É.
¨ÎA relative humidity range of 30% to 75%.
¨ÏAn atmospheric pressure range of 700 hpa to 1,060 hpa
¨ÐA temperature of the water at the inlet of water-cooled EQUIPMENT not higher than 25¡É

 

Middle steam sterilizer

| Specification |

 

HS-250

HS-350S

 

 

| Feature |

It has the built-in cycle program to process the wrapped instruments or textile products and unwrapped instruments as well as the liquids; the phases of ¡¸READY¡¹,¡¸STERILIZATION¡¹,¡¸SLOW or FAST EXHAUST¡¹,¡¸DRYING¡¹and ¡¸COMPLETION¡¹ are automatically performed.

 1. The Temperature Controller/Recorder precisely controls the set temperature for sterilization and at the same time, the sterilization temperature is recorded in graph on the chart for 24 hours whereby the result of sterilization can be checked; it can also serve as the thermometer indicating the present temperature.

2. It is equipped with the vacuum system consisting of powerful water pump and ejector, therefore it performs the air removal as the prevacuum and performs drying phase as the post vacuum after sterilization phase. consequently, it effective in improving the penetration of sterilization agent and the drying performance, and shortening the cycle time and reducing the noise and the trouble rate of equipment.

3. If the door is not locked, the cycle is not started; if the pressure of 0.3§¸f/§² or more remains in the chamber after sterilization, the safety device prevents the door from being opened.

4. The standard type HS-250 uses the built-in steam generator exclusively for the steam source while the standard type HS-350s can use exclusively the external steam. But either the built -in steam generator or the external supply system can be exclusively used; otherwise both of them can be concurrently used regardless model type upon the request of the user.

5. The built-in steam generator is equipped with electric heater,automatic temperature regulator, automatic water feed system and safety valves, etc.; it is the device which ensures a stable supply of saturated steam whereby the sterilizer (HS-250) can be used without the limitation of location.

 

| Specification |

 

¡¡

MODEL

HS-250

HS-350S

Cabinet

Stainless Steel Plate

Stainless Steel Plate

W765×H1,855×D1,168mm

W765×H1,855×D1,168mm

Chamber

Rectangular w/Jacket(SUS316)

Rectangular w/Jacket(SUS316)

W500×H500×D1,000mm,250§¤cap

W500×H700×D1,000mm,350§¤cap

Air Removal

Gravity / Vacuum

Gravity / Vacuum

Operating
Temperature

121¡É(1.0§¸f/§²)¡­132¡É(2.0§¸f/§²)

121¡É(1.0§¸f/§²)¡­132¡É(2.0§¸f/§²)

Power Source

Standard : Built-in Steam Generator

Standard : External Steam Generator

AC220V,3ph,50/60§Ô,47A or

AC220V,1ph,50/60§Ô,5A

AC380V,3ph,4wire,50/60§Ô,31A

¡¡

Optional : External Steam System

Optional : Built-in Steam Generator

AC220V,1ph,50/60§Ò,5A

AC220V,3ph,50/60§Ô,47A or

¡¡

AC380V,3ph,4wire,50/60§Ô,31A

Steam Source

Standard : Built-in Steam Generator

Standard : External Steam System

1,5bhp, max. 7§¸f/§²

Saturated Steam of min. 97% Dryness

Heater : 15§Ò

Pressure: 3.5§¸f/§²¡­5§¸f/§²

Feed Pump : 250W

Flow Rate: max.50§¸/hr

Optional: External Steam System

Optional : Built-in Steam Generator

Saturated Steam of min. 97% Dryness

1,5bhp, max. 7§¸f/§²

Pressure: 3.5§¸f/§²¡­5§¸f/§²

Heater : 15§Ò

Flow Rate: max.50§¸/hr

Feed Pump : 250W

Water Source

Pressure : 2§¸f/§²¡­5§¸f/§²

Pressure : 2§¸f/§²¡­5§¸f/§²

Flow Rate : max.50§¤/min

Flow Rate : max.50§¤/min

Vacuum System

Water Pump : 880W, Water Ejector

Water Pump : 880W, Water Ejector

Control System

Temperature Indicator/Controller/Recorder

Temperature Indicator/Controller/Recorder

Adjustable Range : 70¡É¡­130¡É

Adjustable Range : 70¡É¡­130¡É

Chart : Ø6", 1rpd

Chart : Ø6", 1rpd

Timer

Electric Powered, Auto-Reset Type 0¡­60min

Electric Powered, Auto-Reset Type 0¡­60min

for Sterilizing & Drying

for Sterilizing & Drying

Loading System

Shelves : W450×L906mm,3ea

Shelves : W450×L906mm,4ea

Rack : 1ea

Rack : 1ea

Net Weight

674§¸

650§¸

Operational
Environment 
Conditions
(IEC601-1)

¨ÍAn ambient temperature range of +10¡É to +40¡É.
¨ÎA relative humidity range of 30% to 75%.
¨ÏAn atmospheric pressure range of 700hPa to 1,060hPa.
¨ÐA temperature of the water at the inlet of water-cooled EQUIPMENT not higher than 25¡É.

     Send your inquiryInquiry form
     E-mail: lab@labkorea.com
    ESEL TECHTRA INC.
    Tel : +82 32 431 2371  Fax : +82 32 431 2372
     #1382-4, Kuweol-3dong, Namdongku, Incheon, Korea
     ¨Ï Copyright 2000 www.labkorea.com ® All right reserved