labkorea Home

Korean products Home

UTM main Home

 Program TMaster works in WINDOWS environment.  test parameters are saved into disk dara files format.  Test parameterization excutes on the basis of menus, which enable to create a now test, or to modify already created test.  The majority of menus are common for all type of executed tests and some are specially created for concrete tests.  Creation of these menus, including corresponding algorithms, is ensured by the producer.  TMaster program enables, during a test of series of similar testing specimens, setting chosen parameters of testing specimens before the start of a test of each specimen.  It is possible to print TMaster output reports in English.

   Basic offer of functions of TMaster program is divided according to the main phases of program activity during the test preparation and test execution.  Service is assigned for setting basic parameters of a testing machine.  It is a question of working space and used load cell definition, of frame stiffness setting, and of setting the direction of tensile force action.  Further functions from the offer Service serving for the transducers calibration, control optimization and filters and period of sampling setting are protected by security password and are not currently accessible to machine staff.

 Setting enables to set test parameters and is divided into the following menus;

- Test description - setting the basic test parameters

- Setting criterions and protection

- Setting shape and size of the sample

- Setting the scope of dialogue before the test(for each tested specimen)

- Setting the scope of dialogue after the test(for each tested specimen)

- Test results processing

 Test enables in section Manipulation to set initial state of the machine.

It is the question of switching on and switching off the driving mechanism., setting the starting position and pre-loading and of transducers zero setting.

Section Test control enables start and interruption of the test.  In the course of the test a tensile diagram and up-dated information about the test state are displayed.  In the course fo the test the operator can switch over to the final speed do loading, He can interrupt the test, restart it and continuously unload up to set pre-loading.  After finishing the test it is possible to set final dimensions of testing specimen and to print the report.

 Material

Testing specimens

Test

Test result

 Metals

flat and cylindrical rod

pipes  wires  foils and band

Tensile test

Pressure test

Tensile test at lower temp.

Tensile test at higher temp.

Strength of wires in tension

Three point bend

Maximum load/stress

extension at maximum load

load/stress at break

extension/strain at break

load/stress at upper yield

maximum/minimum strength

breaking length

strength at break

extension at upper yield

average maximum/minimum load

average maximum/minimum

strength

load at offset yield (proof)

stress at offset yield

extension at offset yield

strain at offset yield

elongation after fracture(%)

sample data

sample time

pass/fail limit

sample dimension

static loads

extension at % maximum load

 Plastic

Rods

Pipes

hard foamed materials

fibers

Tensile test

Pressure test

fracture mechanics test

Creep

Bend

 Rubber

Vulcanized rubber

Combined materials

Tensile and pressure test

Resistance against fatigue

Setting of structural strength

 Textile

Fibers

Yarns

knitted fabric

Tensile test

 Leather

Tensile strength

Strength for tearing of the slot

 Concrete

Cylinder mold

cube mold

Beam mold

Pressure test

Bend test

Tensile test

Structural test