 |
Application
This system can do following wear test - Ball on disc,
pin on disc, pin on plate and thrust washer.
Measuring parameters are wear coefficient, friction
force, wear loss measurement, temperature and humidity.
Test conditions are in dry, wet conditions and lubrication.
Technical Spec
- Rotational speed : 1 to 1,700 RPM
- Radios of test Track : 0 to 40 mm
- Load range : 5 to 200 N
- Humidity control : 30-90% R.H
- Heating range : 20-150 กษ
- Heating method : cartridge or hot air heater
- lever ratio : 10:1, 2:1
- Temperature sensor : K-type thermocouple
- Disc specimen: 30, 60 mm dia. x 8 mm thick
- Pin specimen: 5 mm dia.x 15 mm long
- or other size
- Ball specimen: 5.95 mm, 12.7 mm dia.
- Interface : MUX Serial Link Interface Module
- Software: Sequence control and data acquisition software
- Motor : AC servo 750W,1.4kW
- Power : 220VAC, single phase
|
Heating Option:
Lubricated Tests : up to 200
กษ
Dry Tests : up to 600 C by cartridge
or hot air
Air Heating Capacity : 220 V, 440 W
Temperature Sensor : K-type thermocouple
Lubricant Enclosure:
Bath
Volume : 100 ml
Heating Power : 200 W
Temperature Rangr : Ambient to 200กษ
PC spec.
500
MHz CPU
64 MB RAM
6.4 GB HDD
3.5" FDD
MS compatible mouse
17" color monitor
RS 232 serial
port |
Control
Rotation Speed
Temperature
Load
Test Duration
Record
Rotational
Speed
Wear
Friction
Force
Temperature
Contact
Potential
Number of Revolution
Sliding Speed
Friction
Coefficient
Sliding Distance
Test Duration |
