labkorea Home

Korean products Home

This rubber friction wear test machine is suitable for the mechanical friction evaluation of production rubber part and small scale development tests.

This system can do following wear test - Ball on rubber flat and plate on rubber hemisphere.

Test materials are bioengineering material, polymer, glove material, shoe material, rubber and wiper blade.

Technical Spec.

Contact Configurations : Ball on Plate  
                                   Plate on Plate  
                                   Plate on Hemisphere  
Normal Load :  0.1 to 30 N  
Friction Force Range :  0 to 50 N  
X Axis Speed Range : 0.5 mm/s to 10 mm/s  
                                0.05 to 0.9 mm/s  
                                0.01 to 0.09 mm/s  
X Stroke : 1 to 20 mm  
Y Index Speed : 10 mm/min maximum  
Y Index : +/- 9 mm in steps of 0.5 mm  
Temperature Range : Ambient to 100 ℃ 
Dwell (time delay) : User selected in seconds up to 8 hours  
Humidity Range : 30 to 90 % R.H.  
Temperature Sensor : K-type thermocouple  
Heating Capacity : 120 W
Interface : R&B MUX Serial Link Interface Module  
Software : R&B Windows based set point control and data acquisition                 software  

Control factor

 X Position  
 X Axis Speed  
 Y Position  
 Y Axis Speed  
 Temperature  
 Dwell Period 
 Test Duration

Record factor
 X Position

 Temperature
 Friction 
 Friction Coefficient
 Y Position  
 Humidity